Air Hydraulic Foot Pedal Pump Auto Body And Shop Press Extra Heavy Duty
One pump came with hose that was less than 2 FEET LONG, what the h... To do with that, pure junk? Do u think they know anything about hydraulic tools? HELLO: We are relisting our pump after a long absence. Our pump is not the cheapest, so if you are just shopping price good luck.
We all know from experience "You get what you pay for". Other sellers have copied our. And they are junk dealers.
Our piston can be opened to access and change the seal inside. Plastic pistons are factory sealed and can only be replaced. This adds a lot of extra expense down the road, as a future rebuild cost could get very high.
WE USE: UPGRADED PISTON SEALS: We now use TEFLON SEALS on the piston they last longer. Better and withstand the heat very well. Aluminum Piston Sleeve = Okay so many of these pumps are using steel metal piston sleeves & as you know compressed air carries water in it. The water in the air will corrode this sleeve, tear the seals, and seize the piston.
WE USE: Cast aluminum reservoir: There are many brands that still use plastic reservoirs and housings for these style pumps. Well; we all know this is a foot pump so it used / placed on the floor. So it is dragged and dropped constantly. I lost count of how many reservoirs I changed and / or melted and repaired cracks on over the years.
Cast aluminum reservoir takes a beating! I mean this is a solid base.
It resists corrosion and will not crack or split. In reality over 95% of the failures / repairs I performed were customer fault due to misuse, bad air supply full of water and oil. With a new pump if it works at the get go and you take care of it will last for many years. To avoid placing defective pumps into customers hands we bench test each pump at the factory. SIX TIMES, and it is attached to an actual ram in a press applying real time pressure to the 10,000 pound capacity WITH A PSI AND TONNAGE GAUGE.
Rebuild kits: We have kits in stock for rebuilds down the road. My kits sell for a fourth of what competitors charge. Pump operates on 90-145 PSI (90+ minimum). 3/8 NPT oil output, safely builds to 10,000 pounds and has a built in safety overload pump saver. Use able oil 98 cubic inches (Suitable for all 10 ton rams, frame and body work).
Release lock plate so operator can release and remove foot as release / return takes effect. 3 pedal functions, Apply pressure, Hold Pressure, Release pressure. Net Weight : 18 pounds (With oil). Quiet smooth operation, GIANT air muffler for low operating noise.
The item "AIR HYDRAULIC FOOT PEDAL PUMP AUTO BODY AND SHOP PRESS EXTRA HEAVY DUTY" is in sale since Saturday, September 29, 2018. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Auto Lifts & Frame Machines". The seller is "t-p-h2015" and is located in Fort Lauderdale, Florida. This item can be shipped to United States.
- Manufacturer Part Number: TPH-2600-S3
- Brand: TPH
- Vehicle Type: Heavy Duty/Commercial
- Capacity: 10,000 PSI OUTPUT DRIVES TO 50 TON
- Features: Adjustable