Extra Heavy Duty Air Silver Foil Bubble Cell Insulation 35 Sq M Australia Made
TO VIEW ALL FOIL BUBBLE INSULATION. Be sure to add me to your favourites list. Thank you for viewing my listing. THE STRONGEST BUBBLE FOIL INSULATION EVER. IDEAL FOR HOT OR COLD CLIMATE. 25 METRES LONG (85 FEET). 35 SQUARE METERS (400 SQUARE FEET). AVAILABLE EXCLUSIVELY THROUGH THIS LISTING. 33 MM (1 1/4) DIAMETER BUBBLES.
13 MM THICK (1/2) BUBBLES. TWO LAYERS OF ALUMINUM FOIL.
Call Eddie Solomon if you have any question. THEY ARE NOT FIRM DATES.
Please Note: This insulation is custom made - Minimum order at the moment is 600 Square Meter. Contact me if you want smaller quantity and for discounted prices. EXTRA THICK SILVER FOIL BUBBLE INSULATION. Double Foil Insulation is available in 35 Square Meters rolls - 1,500 mm wide x 25 Meters long.
This style can be used in a variety of applications because it's light weight and easy to handle yet provides superior protection. The bubble center creates maximum R-Value and the reflective foil on both sides allow it to reflect 97% of radiant heat away from a structure on the outside and back in on a structure from the inside. This is why it works effectively in both hot and cold climates. The main feature is the reflective nature of the insulation and not its thickness. For thicker sheets, you may double up. Double Foil Reflective Insulation is a versatile insulation consisting of an 4.8 mm thick - 10 mm diameter layer of polyethylene bubbles sandwiched between two sheets of highly reflective, 99% aluminum. Reflective Bubble Insulation provides superior reflectivity of radiant heat while providing protection against conductive heat gain and loss as well as performing as a vapor barrier.
Ft - 320 g/sq m. Temperature Range - ASTM C411 -50 F to 180 F (-45 c to 82 c).
Flame Spread (ASTM E84-05) 5. Smoke Development (ASTM E84-05) 5. Emissivity - ASTM C1371 0.03-0.04. Reflectivity - ASTM 3903 0.96-0.97.
Water Vapor Permeance-ASTM E96 No change to thermal performance over time due to compaction, disintegration or moisture absorption. Thin sheets takes up less room than bulk insulation. Can act as a vapor barrier. Will not mold or mildew.
Radon retarder, will limit radon penetration through the floor. This is a high quality industrial strength Double Foil Insulation Bubble Wrap. Long lasting, heavy duty nylon barrier layer to increase longevity. Bubble Wrap is Lightweight and easy to use.
It is an inexpensive solution to your insulation needs. Our standard single and double bubble foil insulation is. Silver foil Available in a range of widths, from. 375 mm 15" to 1,500 mm (60"), and lengths. Aluminium products, as well as products covered with Silver Foil. On one side and white polyethylene on the other. This durable bubble insulation will withstand temperatures between 50 degrees Celsius. And 82 degrees Celsius (180 degrees Fahrenheit), making it ideal for both attic and flooring installations. Be sure to check out our silver Foil Aluminium. This is the best tape for bubble foil insulation because it ensures the continuity of the reflective surface, which is essential for getting the most from your installation. Radiant floor heating has been in use for centuries and radiant barriers help to retain the heat generated by the radiant heating system blocking it from escaping into the ground. Insulation is extremely tough and pliable, easy to install, and is an excellent vapor barrier for all your radiant floor heating applications, thus greatly reducing your electricity or gas bills. Insulation installed in crawl spaces below a building structure reflect the heat flows that are flowing downward from the flooring back up into the flooring at a 95-97% rate providing increased comfort and heat retention.
The temperature of the cold floors which cause cold feet will be raised while your heating bill is reduced, providing for increased comfort. As heat is reflected back into the living area, it warms other objects which then radiate heat back into the room, further increasing your living comfort. Insulation applications are only limited by your imagination. We can also custom make any combination to suit your requirements.
All the insulation is made right here in Australia with the highest standard of material and manufacture. The main feature of this insulation is its reflective nature and not the extra thickness of the material will add an improved r value. The following CSIRO Test was conducted on the Standard size bubbles single sided foil bubble insulation.
This listing is for the Extra Heavy Duty Double Foil Bubble Insulation which commands even protection and a higher R value. CSIRO- Materials Science & Engineering. (ABN: 41 687 119 230).
Sample Description: silver insulation material designed for pallet protection. At an ambient temperature of 23.1ºC difference from face to back 2.4ºC. At an ambient temperature of 28.6ºC difference from face to back 5.1ºC. OF THE INSULATIVE EFFECTIVENESS OF SINGLE-SIDED 10 MILLIMETRE BUBBLE FILM (4.8 mm Thick).
THE TRUTH ABOUT R VALUE. Around most of the world, R-values are given in SI units, typically square-metre kelvin per watt or m2·K/W (or equally, m2·°C/W). In the United States customary units, R-values are given in units of ft2·°F·hr/Btu. It is particularly easy to confuse SI and US R-values, because R-values both in the US and elsewhere are often cited without their units, e.
Usually, however, the correct units can be inferred from the context and from the magnitudes of the values. United States R-values are approximately six times SI R-values.
Furthermore, the actual R value of the insulation depends entirely on the application and how you apply the insulation. An R 2 value may increase or decrease depending on how the insulation is applied. With the Silver Foil bubble Insulation you will need an air pocket between the surface. Of the structure you are insulating.
The air pocket has its own r value depending on the width of the air pocket thus increasing the R value of the insulation material. Conversely, if you apply the insulation material directly on the surface of the structure will defeat the purpose of insulation because the insulation material will act as a heat conductor and will end up heating the premises in the hot summer and will also be counterproductive in winter. Radiation is minimized by low emissivity (highly reflective) exterior surfaces such as aluminum foil. Lower thermal conductivity, or higher R-values, can be achieved by allowing an air gap between the surface of the structure and the aluminium foil. The air gap will act an heat pocket where heat will accumulate instead of being circulation inside your structure.
Trapped air has its own R value. The R value of trapped air depends on how much gap is between the insulation material an the structure.
A wider gap will produce a greater R value and a narrower. Gap will produce a smaller R value. Air by itself has no R value; only trapped air will produce an R value.
However, if you allow a very wide gap, the air will not be trapped and may reduce your R value and cause an opposite result. The R-value is a measure of an insulation sample's ability to reduce the rate of heat flow under specified test conditions. The primary mode of heat transfer impeded by insulation is conduction, but insulation also reduces heat loss by all three heat transfer modes: conduction, convection, and radiation. The primary means of heat loss across an uninsulated air-filled space is natural convection, which occurs because of changes in air density with temperature.
Insulation greatly retards natural convection making the primary mode of heat transfer conduction. To find the heat loss per square meter, simply divide the temperature difference by the R value. If the interior of a home is at 20 °C, and the roof cavity is at 10 °C, the temperature difference is 10 C° (= 10 K difference). Assuming a ceiling insulated to R2 (R = 2.0 m2K/W), energy will be lost at a rate of 10 K/2 K·m2/W = 5 watts for every square meter of ceiling. Doubling the thickness of the insulation material or even doubling the thickness of the trapped air layer doubles the R value. This does not hold for compressed bats of glass wool because compressing the bats does not proportionally increase the r value. Furthermore, doubling the thickness of the Silver Foil Bubble Insulation does not double the R value of the insulation material. The main feature of the Silver Backed Bubble Insulation is its reflective nature and not its thickness. To Double the R value of the Foil Bubble Insulation you will need to create a heat pocket which hads it s own R value that can be added to the R value of the Foil Insulation. As an example, the if Foil Bubble Insulation has an R value of r2 and the. Heat pocket has an R value of R 1,5, both R value are added together to achieve an R value of R3.5 in SI units or R19 in United States standards.
As discussed earlier porous material such as foam and bats does not allow the full potential of trapped air to be established and will not give you the proportional R value relative to thickness. In calculating the R-value of a multi-layered installation, the R-values of the individual layers are added:.
R-value(outside air film) + R-value(brick) + R-value(sheathing) + R-value(insulation) + R-value(plasterboard) + R-value(inside air film) = R-value(total). To account for other components in a wall such as framing, an area-weighted average R-value of the whole wall may be calculated. For the most part, testing the R-value of insulation is done at a steady temperature, usually about 70 °F (21 °C) with no surrounding air movement. Since these are ideal conditions, the listed R-value for insulation will almost certainly be higher than it would be in actual use, because most situations with insulation are under different conditions. Some types of foam insulation, such as polyurethane and polyisocyanurate are blown with heavy gases such as chlorofluorocarbons (CFC) or hydrochlorofluorocarbons (HFCs).
Many manufacturers will rate the R-value at the time of manufacture; critics argue that a more fair assessment would be its settled value.  The foam industrywhen? Adopted the LTTR (Long-Term Thermal Resistance) method,  which rates the R-value based on a 15 year weighted average. However, the LTTR effectively provides only an eight-year aged R-value, short in the scale of a building that may have a lifespan of 50 to 100 years. Note that these examples use the non-SI definition and/or given for a 1 inch (25.4 mm) thick sample. Vacuum insulated panels have the highest R-value (approximately R45 per inch in American customary units); aerogel has the next highest R-value (about R10-30 per inch), followed by isocyanurate and phenolic foam insulations with, R8.3 and R7 per inch, respectively. They are followed closely by polyurethane and polystyrene insulation at roughly R6 and R5 per inch. Loose cellulose, fiberglass (both blown and in batts), and rock wool (both blown and in batts) all possess an R-value of roughly R-2.5 to R-4 per inch.
Straw bales perform at about R1.5. However, typical straw bale houses have very thick walls and thus are well insulated. The effective thermal resistance of an enclosed air cavity is strongly influenced by radiative heat transfer and distance between the two surfaces.
Occasionally, I list the same item with discounted prices for a limited time. To check my other items go to. Public holidays and weekends excluded. However, there is guarantee that you will receive your parcel by the estimated date. If you wish to have your item delivered or handled in a special manner, let me know and I will inform you if there is any additional charge.
If you live in a remote location with no courier service, let me know. Delays may be experienced in case of work overload , postal or courier. Delays, public holidays and weekends, or shortage of stock. If premises unattended , leave in a secure location. If premises unattended, place a card in the mailbox and leave parcel at nearest collection point.
The parcel shall be deemed to have been delivered. If the parcel is sent by courier, a signature is usually required. You can select that the courier leaves the parcel.
If you have any issue with the item, let me know. No other warranties either expressed or implied are offered.
You may find similar items cheaper with other sellers or retailers. I also rely on sighted assistants to help with the pictures and description. If you prefer to trade with a behemoth, please go elsewhere. From time to time I offer the same item cheaper for a limited period. The description of the items is as provided by the principal sellers and believed to be reliable. All feedback will be reciprocated. If you are happy with my service, tell the whole world, if you are not happy, tell me. If you have any issue with the item, contact me first before you post negative or neutral feedback.
Issues can be resolved amicably. Leaving damaging feedback before your attempt to resolve any issue first will be deemed as defamatory and in contravention of the terms and conditions and will be dealt with accordingly. The bad Karma will result in proceedings for the removal of such feedback and will give rise of a liquidated claim for damages. Any unwarranted negative or neutral feedback will be removed using legal processes and may give rise to a liquidated claim for defamation or/ and breach of contract. All issues can be resolved amicably.
All brand names & trademarks are the property of their respective holders and are referred to here for descriptive purpose only. The listed brand names and model designations are intended only to show the compatibility of these products with various products. Pictures are for descriptive purposes only. I reserve the right to supply products of similar or higher quality and performance if the original product is no longer available due to changes in manufacturers specifications , alterations or improvements.
All dimensions and measurements are approximate. Colour is as shown unless otherwise stated. Colour may vary depending on lighting, your computer screen resolution or angle of viewing.
Please exercise care when you open your package when you receive it. Do not slash the packing material with a knife as to damage the contents of the package. Open carefully so you dont drop the contents in case of fragile or breakable items. If the information is not correct, please provide your correct contact information.
You agree to abide by the herein Terms & Conditions and any further amendments. Any dispute arising out of this. Agreement or the interpretation thereof. Settled in accordance with the laws and statues of the State of New South Wales, Australia. The parties agree that the venue shall be Sydney, New south Wales.
Cash in person or Bank Deposit. The item "EXTRA HEAVY DUTY AIR SILVER FOIL BUBBLE CELL INSULATION 35 SQ M AUSTRALIA MADE" is in sale since Tuesday, December 17, 2013. This item is in the category "Home & Garden\Other Home & Garden". The seller is "eddiesolomon777" and is located in Tamborine Mountain, QLD.
This item can be shipped worldwide.
- Brand: Unbranded
- MPN: XHDSFBI
- Product Type: Silver Foil Bubble Wrap Insulation
- CUSTOM MADE - THE TOUGHEST: THE TOUGHEST SILVER FOIL BUBBLE INSULATION